Cross Road

Additional Details

MUTCD Section 2C.37 Intersection Warning Signs (W2-1 through W2-6)
Option: A Cross Road (W2-1) symbol, Side Road (W2-2 or W2-3) symbol, T-Symbol (W2-4), or Y-Symbol (W2-5) sign (see Figure 2C-8) may be used in advance of an intersection to indicate the presence of an intersection and the possibility of turning or entering traffic. The Circular Intersection (W2-6) symbol sign accompanied by an educational TRAFFIC CIRCLE (W16-12p) plaque (see Figure 2C-8) may be installed in advance of a circular intersection.
The relative importance of the intersecting roadways may be shown by different widths of lines in the symbol.
An advance street name plaque (see Section 2C.49) may be installed above or below an Intersection Warning sign.
Guidance: The Intersection Warning sign should illustrate and depict the general configuration of the intersecting roadway, such as cross road, side road, T-intersection, or Y-intersection.
Intersection Warning signs, other than the Circular Intersection symbol (W2-6) sign and the T-intersection symbol (W2-4) sign, should not be used on approaches controlled by STOP signs, YIELD signs, or signals. The Circular Intersection symbol (W2-6) sign should be installed on the approach to a YIELD sign controlled roundabout intersection.
Where the side roads are not opposite of each other, the symbol for the intersection should indicate a slight offset.