Toner Pipe & Cable Locator

Additional Details

• 2 frequencies for pipe, cable and line tracing
• Passive operation for locating iron and steel targets and energized 50 or 60Hz power lines
• Inductive and conductive signal coupling
• Peak and null operation for precise locating
• Piezoelectric speaker
• 45 degree Depth Measurement
• Patented HeliFlux Sensors
• Optional miniature mole transmitter for non-metallic pipe traces, concrete and tunneling 18 feet deep
• Water- and crush-resistant hard case
• Training video for all rentals and sale units
• 3 year warranty

Mode 1
Magnetic Locating

• Only receiver required
• Set mode to MAG, gain to mid-range
• Find ferrous pipes, meters and valves, property markers, anything with a magnetic field generated by energized power lines

Inductive Mode 2
82.5KHZ -HF-

• Place transmitter over the target, or use Inductive Signal Clamp.
• The trace signal generates an alternating magnetic field around the cable which induces a signal to the receiver s cable sensor.

Conductive Mode
571HZ -LF- and 82.5KHZ -HF-

Trace the LF signal up to 4000 feet. If an exposed section of a target gas or water pipe is accessible, conductive coupling is the most reliable method for the trace signal. This mode uses both HF and LF, so you can use all three features on the-the-fly.

Mode 3
Combined use all features

Instantly switch between MAG, LO and HI modes without returning to the transmitter makes the MAC-51Bx the most versatile and cost-effective underground locater on todays market. Verify the type of target -magnetic or non-magnetic-, in the MAG mode. Switch to LO mode to trace the cable, locate a complete break -where the LO signal disappears-, and then continue tracing beyond the break by switching to the HI mode. Determine depths by traditional triangulation methods.